3D printer specifications and comparison
Filter our documented selection and compare two or three models. Prices, stock and bundle contents must be checked with the seller.
Nominal build volume only: allow room for supports, orientation and reserved areas. A resin cover is not ventilation. 1 inch = 25.4 mm.
114 matching models
Select two or three models. Selected models stay in the comparison when filters change.
Anycubic Kobra 2
220 × 220 × 250 mm · Open frame
Slower speed and acceleration than the Neo and Pro in the same series; no multicolor printing.
Anycubic Kobra 2 Max
420 × 420 × 500 mm · Open frame
No multicolor; a bed this size heats and stabilizes more slowly than a 220 mm footprint.
Anycubic Kobra 2 Neo
220 × 220 × 250 mm · Open frame
Slower than the Kobra 2 Pro and Max; no multicolor printing on this model.
Anycubic Kobra 2 Pro
220 × 220 × 250 mm · Open frame
No multicolor printing; same footprint as the Kobra 2 Neo, with top speed being the main real difference.
Anycubic Kobra 3
250 × 250 × 260 mm · Open frame
Open frame: ABS and ASA are not listed among the materials Anycubic advertises for this model.
Anycubic Kobra 3 Max
420 × 420 × 500 mm · Open frame
A bed this size heats and stabilizes more slowly than a 250 mm footprint; the frame stays open, with no enclosure for ABS or ASA.
Anycubic Kobra 3 V2
255 × 255 × 260 mm · Open frame
Still an open frame with no enclosure; the volume gain over the Kobra 3 stays modest (about 4%).
Anycubic Kobra S1
250 × 250 × 250 mm · Enclosed
The printer alone is single-color. TPU 95A compatibility does not extend to multicolor feeding through ACE Pro.
Anycubic Kobra S1 Max
350 × 350 × 350 mm · Enclosed
Multicolor isn't included as shipped: one or more ACE 2 Pro modules remain separate accessories. Check the exact bundle contents (included nozzles, plate) on the retailer's listing.
Anycubic Kobra X
260 × 260 × 260 mm · Open frame
The frame is open. Active drying requires ACE 2 Pro; seven-color or nineteen-color configurations need additional hardware.
Anycubic Photon Mono 2
89 × 143 × 165 mm · Enclosed
A compact 2.09L volume: suited to miniatures and small parts, not large objects.
Anycubic Photon Mono 4
153.4 × 87 × 165 mm · Enclosed
A compact 2.2L volume: suited to miniatures and small parts, not large objects.
Anycubic Photon Mono 4 Ultra
153.4 × 87 × 165 mm · Enclosed
Same compact 2.2L volume as the Mono 4: speed improves, not the footprint.
Anycubic Photon Mono M5
218 × 123 × 200 mm · Enclosed
A moderate advertised speed of 20 to 50 mm/h per Anycubic, slower than tilt-release models. Check the exact bundle contents on the retailer's listing.
Anycubic Photon Mono M5s
218.8 × 123.8 × 200 mm · Enclosed
A contrast ratio advertised at 480:1: worth comparing against the brand's newer models for the finest detail.
Anycubic Photon Mono M7
223 × 126 × 230 mm · Enclosed
A larger bed heats and stabilizes more slowly than a compact format like the Mono 4.
Anycubic Photon Mono M7 Max
298 × 164 × 300 mm · Enclosed
A bed this size heats and stabilizes more slowly than a compact format like the M7 or Mono 4.
Anycubic Photon Mono M7 Pro
223 × 126 × 230 mm · Enclosed
Same volume as the base M7: the gain is in speed and precision, not plate size.
Anycubic Photon Mono X2
196 × 122 × 200 mm · Enclosed
A wider plate than the Mono 2, but still built for figurines, not large-format resin work.
Anycubic Photon P1
223 × 126 × 230 mm · Enclosed
The camera and AirPure 2.0 filtration are sold as separate accessories, not standard per Anycubic's listing; a compact 6.5L volume suited to mid-size parts, not large prints.
Artillery Sidewinder X4 Plus
300 × 300 × 400 mm · Open frame
The frame stays open with no enclosure, so ABS and nylon benefit from a warm, draft-free room. Exact box contents (95% pre-assembled) should be checked on the retailer's listing.
Artillery Sidewinder X4 Pro
240 × 240 × 260 mm · Open frame
The frame stays open with no enclosure, so ABS benefits from a warm room. Exact box contents and included nozzles should be checked on the retailer's listing.
Bambu Lab A1
256 × 256 × 256 mm · Open frame
An open frame does not provide the same thermal conditions as an enclosed printer. Choose materials accordingly.
Bambu Lab A1 mini
180 × 180 × 180 mm · Open frame
Larger objects may need splitting and assembly. Check moving-bed clearance as well as the printer footprint.
Your comparison (0/3)
Select at least two models to show the comparison.