For a revised, corrected Kobra 3
Anycubic Kobra 3 V2
An open-frame FDM printer with a 255 × 255 × 260 mm nominal build volume, a built-in 720p camera, and optional multicolor.
In short The Anycubic Kobra 3 V2 is an open-frame filament (FDM) 3D printer with a 255 × 255 × 260 mm (10 × 10 × 10.2 in) build volume. Anycubic claims a 600 mm/s top speed, a 300 °C (572 °F) nozzle and a 110 °C (230 °F) bed; the printer measures 452.9 × 504.7 × 483 mm (17.8 × 19.9 × 19 in) and weighs 9.4 kg (20.7 lb).
Documentary analysis · Not personally tested
FDM · Open frameWhy consider it?
A built-in 720p camera as standard, faster zoned leveling, and nozzle sealing advertised at Kobra S1 level.
What to verify
Still an open frame with no enclosure; the volume gain over the Kobra 3 stays modest (about 4%).
Anycubic Kobra 3 V2 specifications
- Technology
- Filament (FDM)
- Build volume
- 255 × 255 × 260 mm (10 × 10 × 10.2 in)
- Printer dimensions
- 452.9 × 504.7 × 483 mm (17.8 × 19.9 × 19 in)
- Weight
- 9.4 kg (20.7 lb)
- Enclosure
- Open frame
- Claimed top speed
- 600 mm/s
- Claimed acceleration
- 20,000 mm/s²
- Max nozzle temperature
- 300 °C (572 °F)
- Max bed temperature
- 110 °C (230 °F)
- Multicolor
- ACE Pro sold separately; up to 8 filaments advertised with the Combo version.
- Materials
- PLA, PETG, and TPU per Anycubic.
- Screen
- 4.3-inch touchscreen
- Built-in camera
- Yes
- Connectivity
- USB
- Listed features
- Auto bed leveling, filament runout sensor
How much space does it need?
The Anycubic Kobra 3 V2 measures 452.9 × 504.7 × 483 mm (17.8 × 19.9 × 19 in) for a 255 × 255 × 260 mm (10 × 10 × 10.2 in) build volume: the dashed box is the printer, the solid cube the largest theoretical part, about 15% of the machine’s volume. Add room for the spool or multicolor unit, cables and ventilation.
Source: official Anycubic pages (store.anycubic.com), checked September 28, 2026. Manufacturer claims, not our measurements. Build volume is nominal: orientation, supports and reserved zones can reduce the usable space.
Which projects is it for?
The Kobra 3 V2 is a revision of the Kobra 3 with a slightly larger nominal volume, 255 × 255 × 260 mm versus 250 × 250 × 260 mm per Anycubic, about 4% more volume. It targets the same audience as the Kobra 3: beginners and makers who want everyday parts without a closed chamber, with the option to add multicolor later.
The advertised speed stays up to 600 mm/s, with zoned leveling that only recalibrates the area under the model, shortening print-prep time per the manufacturer.
Materials and setup
The printer runs PLA, PETG, and TPU per Anycubic, with a nozzle advertised up to 300°C and a bed up to 110°C. LeviQ 3.0 leveling is backed by a widened Y-axis (from 40 to 60 mm per the manufacturer) for a more reliable leveling-probe reading.
Nozzle sealing is advertised at Kobra S1 level to reduce filament leaks, and a 720p camera is built in as standard for remote print monitoring. The ACE Pro is still needed, and sold separately, for multicolor.
What the bundle includes or not
Per Anycubic's listing, the Kobra 3 V2 alone ships with a touchscreen, spool holder, cable holder, purge wiper, hardware bags, signal cable, several filament tubes, nozzle cleaner, test filament, USB drive, power cords, a wrench set, and the camera module.
The ACE Pro for multicolor is not included in this base bundle and is sold separately per the manufacturer. Check the retailer's listing for whether your offer includes this module before comparing prices.
Before finalizing a purchase, compare the exact spec sheet and box contents listed by the retailer rather than relying only on the product photo, especially for the number of spare nozzles, cables included, and assembly accessories. Warranty terms and technical support can also differ noticeably between Anycubic's own store and a third-party retailer, worth checking before comparing two similarly priced offers. Since filament beyond the test spool is not included, it's also worth budgeting for ongoing material costs as part of the overall setup rather than treating the listed price as the full cost.
Alternatives to compare
For the previous generation in the same lineup, the Kobra 3 shares most of the same features, potentially at a lower price. For an enclosed chassis, the Kobra S1 adds a full enclosure for ABS and ASA.
The Anycubic page covers the rest of the manufacturer's lineup, and the multicolor buying guide explains what adding an ACE Pro module involves before you buy one.
Similar printers to compare
Sources and limits
- Source: official Anycubic pages (store.anycubic.com), checked September 28, 2026. Manufacturer claims, not our measurements.
- How we assess specifications
We have not measured noise, real printing speed, accuracy or reliability, so none of these is rated here.