Anycubic Kobra 2 Max

Which projects is it for?

The Kobra 2 Max is an open-frame FDM printer with a 420 × 420 × 500 mm nominal build volume per Anycubic, roughly 88 liters printable at once. It suits bulky parts and multiple batches on a large plate, in the same series launched in September 2023.

The advertised top speed of 500 mm/s, with 10,000 mm/s² acceleration, helps keep print time reasonable despite the bed size, an important point on a footprint this large.

The open frame and the absence of any enclosure also mean ambient room temperature affects print quality more than on a closed-chamber machine, something worth factoring in if you plan to print ABS regularly rather than occasionally on a bed this size.

Materials and setup

The printer runs PLA, ABS, PETG, and TPU per Anycubic, with a nozzle advertised up to 260°C and a bed up to 90°C, a lower ceiling than the lineup's 220 mm models to limit heat-up time on a surface this size.

Automatic LeviQ 2.0 leveling with smart Z-offset compensation recalibrates the surface before each print. The extruder stays single-nozzle: this machine is not built for multicolor.

What the bundle includes or not

Per Anycubic's listing, the Kobra 2 Max alone ships across several modules: frame, base, touchscreen, print head, filament holder and detector, diagonal brace, knob, WiFi antenna, manual, USB cable, hardware, grease, cable clips, tool set, nozzle, screws, power cord, and test filament.

Assembling several modules takes more handling than a fully pre-assembled machine. Check the retailer's listing for whether it specifies an assembly time or additional accessories before comparing two prices.

Warranty terms and technical support can also differ between Anycubic's own store and a third-party retailer, worth checking before comparing two similarly priced offers. Since filament beyond the test spool is not included, it's also worth budgeting for ongoing material costs on a machine this size.

Alternatives to compare

For multicolor at a similar scale, the Kobra 3 Max carries over a similar volume with optional ACE Pro compatibility. For another open-frame large-format option from a competing manufacturer, the Creality CR-M4 remains a relevant comparison.

The Anycubic page covers the rest of the manufacturer's lineup, and the large-format buying guide covers the criteria for choosing a printer this size.