For built-in multicolor, no add-on box
Flashforge AD5X
An open-frame CoreXY FDM printer with a built-in IFS multicolor system, a 220 × 220 × 220 mm nominal build volume for up to 4 colors.
In short The Flashforge AD5X is an open-frame filament (FDM) 3D printer with a 220 × 220 × 220 mm (8.7 × 8.7 × 8.7 in) build volume. Flashforge claims a 600 mm/s top speed, a 300 °C (572 °F) nozzle and a 110 °C (230 °F) bed.
Documentary analysis · Not personally tested
FDM · Open frameWhy consider it?
A built-in IFS multicolor system with no external accessory, a nozzle advertised up to 300°C, a bed up to 110°C, and a travel speed advertised at 600 mm/s per Flashforge.
What to verify
The chassis stays open despite the 300°C nozzle; the exact box contents (included spools, spare nozzles) aren't detailed on the manufacturer's listing.
Flashforge AD5X specifications
- Technology
- Filament (FDM)
- Build volume
- 220 × 220 × 220 mm (8.7 × 8.7 × 8.7 in)
- Enclosure
- Open frame
- Claimed top speed
- 600 mm/s
- Claimed acceleration
- 20,000 mm/s²
- Max nozzle temperature
- 300 °C (572 °F)
- Max bed temperature
- 110 °C (230 °F)
- Multicolor
- Built-in IFS (Intelligent Filament System), no external box, for up to 4 colors or materials per Flashforge.
- Materials
- PLA, PETG, TPU95A, TPU64D-75D, PLA-CF, and PETG-CF per Flashforge.
- Screen
- 4.3-inch touchscreen
- Connectivity
- Wi-Fi, Ethernet, USB
- Listed features
- Auto bed leveling, filament runout sensor, filament cutter
Source: official Flashforge pages (flashforge.com), checked September 28, 2026. Manufacturer claims, not our measurements. Build volume is nominal: orientation, supports and reserved zones can reduce the usable space.
Compare the Flashforge AD5X
Which projects is it for?
The AD5X adds the IFS (Intelligent Filament System) multicolor system directly into the Adventurer 5M's chassis, with no external box to set up alongside it per Flashforge, at the same 220 × 220 × 220 mm nominal build volume. It targets multicolor or multi-material projects (logos, multi-tone figurines) without investing in a separate feed system.
The process is still standard FDM driven with up to 4 simultaneous colors or materials, with the filament-change times typical of this kind of system: each transition consumes and purges some filament, worth factoring in for highly detailed parts.
Materials and setup
The nozzle heats up to 300°C per Flashforge, up from 280°C on the Adventurer 5M, and the bed reaches 110°C. The listing advertises compatibility with PLA, PETG, TPU95A, TPU64D-75D, PLA-CF, and PETG-CF.
The chassis stays open: without an enclosure, materials prone to warping such as ABS aren't among those Flashforge lists for this model, unlike the enclosed Adventurer 5M Pro.
What the bundle includes or not
Per Flashforge, the IFS module comes built in out of the box, with the screen, filament holder, and multicolor module to assemble in three steps advertised as simple. Auto bed leveling and power-loss recovery round out the base equipment.
The number of spools included with the printer and the exact box contents aren't specified on the manufacturer's listing: check the retailer's page, especially to confirm whether your chosen offer includes a starter filament set.
Alternatives to compare
For the same base without multicolor, the Adventurer 5M is the open version and the Adventurer 5M Pro the enclosed version of the same CoreXY chassis. For a different built-in multicolor system, the Bambu Lab P1S paired with its AMS remains the most-cited reference on the market.
The multicolor buying guide covers the differences between a built-in system like the IFS and an external box before choosing.
Similar printers to compare
Sources and limits
- Source: official Flashforge pages (flashforge.com), checked September 28, 2026. Manufacturer claims, not our measurements.
- How we assess specifications
We have not measured noise, real printing speed, accuracy or reliability, so none of these is rated here.