For a compact printer running Klipper
Sovol SV06 ACE
An open-frame FDM printer with a 220 × 220 × 250 mm nominal build volume, pressure-sensor auto leveling, and a speed advertised up to 600 mm/s per Sovol.
In short The Sovol SV06 ACE is an open-frame filament (FDM) 3D printer with a 220 × 220 × 250 mm (8.7 × 8.7 × 9.8 in) build volume. Sovol claims a 600 mm/s top speed, a 300 °C (572 °F) nozzle and a 100 °C (212 °F) bed.
Documentary analysis · Not personally tested
FDM · Open frameWhy consider it?
Pressure-sensor auto leveling with no paper needed, a 64-bit Klipper board, a speed advertised up to 600 mm/s, and a 4.3-inch touchscreen per Sovol.
What to verify
An open frame with no stock enclosure, worth watching for ABS or draft-sensitive filaments. The machine ships partially assembled; check the exact contents on the retailer's listing.
Sovol SV06 ACE specifications
- Technology
- Filament (FDM)
- Build volume
- 220 × 220 × 250 mm (8.7 × 8.7 × 9.8 in)
- Enclosure
- Open frame
- Claimed top speed
- 600 mm/s
- Claimed acceleration
- 20,000 mm/s²
- Max nozzle temperature
- 300 °C (572 °F)
- Max bed temperature
- 100 °C (212 °F)
- Multicolor
- No stock multicolor system; a monochrome single-extruder machine.
- Materials
- PLA, PETG, TPU, and PVA per Sovol; ABS remains possible but a separate enclosure is recommended on this open frame.
- Screen
- 4.3-inch touchscreen
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, USB, Ethernet
- Listed features
- Auto bed leveling, filament runout sensor
Source: official Sovol pages (sovol3d.com), checked September 28, 2026. Manufacturer claims, not our measurements. Build volume is nominal: orientation, supports and reserved zones can reduce the usable space.
Which projects is it for?
The SV06 ACE targets a compact 220 × 220 × 250 mm format per Sovol, suited to everyday parts, figurines, and calibration tests without taking up much desk space or requiring a large workshop area.
A speed advertised up to 600 mm/s with 20,000 mm/s² acceleration per Sovol saves time on batches of small parts, while staying on an entry-level format that's easy to set up for a first Klipper-based machine.
Materials and setup
The nozzle heats up to 300°C and the bed up to 100°C per Sovol, values that cover the PLA, PETG, TPU, and PVA the manufacturer advertises. ABS remains usable but benefits from an added enclosure, not included on the base machine.
Auto leveling relies on a pressure sensor that measures the plate directly, an alternative Sovol advertises to the traditional paper-feeler method for dialing in the first layer.
What the bundle includes or not
Sovol lists a partially assembled machine shipping with a tool kit, a spare 0.4 mm nozzle, side cutters, a plastic scraper, a USB drive with OrcaSlicer and sample models, and a PLA filament sample to start printing right away. Exact contents can vary by retailer.
The advertised assembly time stays short, around fifteen minutes per Sovol, limiting the prep needed before the first prints.
Alternatives to compare
For a significantly larger format on the same Klipper base, the same lineup's SV06 Plus ACE is the most direct comparison. For a faster open-source CoreXY, the SV08 targets heavier use.
The beginner's buying guide helps weigh this compact format against larger or faster machines before buying.
Similar printers to compare
Sources and limits
- Source: official Sovol pages (sovol3d.com), checked September 28, 2026. Manufacturer claims, not our measurements.
- How we assess specifications
We have not measured noise, real printing speed, accuracy or reliability, so none of these is rated here.