For a fast, fixed-bed CoreXY printer
Phrozen Arco
A CoreXY FDM printer with a fixed bed, a 300 × 300 × 300 mm nominal build volume, and a speed advertised up to 1,000 mm/s per Phrozen.
Documentary analysis · Not personally tested
Specification sources reviewed 2026-09-12. These are manufacturer claims, not measurements by Find My 3D Printer.
Why consider it?
A flying gantry on XY linear rails with a fixed bed to reduce wobble, DEP extrusion with an industrial heat pipe, and acceleration advertised up to 40,000 mm/s² per Phrozen.
What to verify
The PentaShield enclosure is sold as an option, not included by default; the 1,000 mm/s speed is measured with a CHT nozzle and a specific PLA per Phrozen.
The specifications that matter
- Process
- FDM
- Nominal build volume
- 300 × 300 × 300 mm
- Enclosure
- Open frame
- Multicolor
- Optional Chroma Kit multicolor module, sold separately, for printing up to four colors.
- Materials
- PLA, PETG, ABS, ASA, TPU, and nylon advertised, with optional dedicated nozzles for PC and carbon-fiber/glass-fiber composites.
Allow room for supports and the chosen orientation. Confirm the exact nozzle, feeder, included accessories and installation clearance against the manual and seller’s listing.
Which projects is it for?
The Arco is an open-frame CoreXY FDM printer with a fixed bed and a flying gantry, for a 300 × 300 × 300 mm nominal build volume per Phrozen. This fixed bed, rather than a moving bed as on some other CoreXY printers, aims to reduce model wobble and keep a stable center of gravity on tall parts.
Phrozen positions the Arco for cosplay props, bulky single-piece prints, and rapid prototyping, with a speed advertised up to 1,000 mm/s under specific conditions and acceleration up to 40,000 mm/s².
Materials and setup
The nozzle heats up to 300°C, and Phrozen advertises compatibility with PLA, PETG, ABS, ASA, TPU, and nylon, with carbon-fiber or glass-fiber composites possible through dedicated nozzles sold separately. DEP (Direct Extrusion Path) extrusion uses a 10 mm industrial heat pipe to limit clogging.
The four-zone heated bed reaches 100°C in two minutes with over 90% heat uniformity per Phrozen, which helps limit warping on parts that cover a large part of the plate.
What the bundle includes or not
Klipper firmware is advertised as pre-installed, with a flexible PEI plate and automatic leveling per Phrozen. The PentaShield enclosure, presented as cutting noise by 15% and filtering odors, remains an optional accessory not included in the base configuration.
The Chroma Kit multicolor module, for printing up to four colors, is also sold separately from the base machine; the exact box contents should be checked on the retailer's listing.
Alternatives to compare
For a factory-enclosed chassis on a comparable volume, the Creality K1 Max is a direct comparison from a different brand segment. For built-in multicolor without a separate module, Elegoo's Centauri Carbon 2 follows a different approach.
The functional parts guide and the multicolor buying guide help place the Arco against these alternatives before buying.
Sources and limits
We have not measured noise, real printing speed, accuracy or reliability. Manufacturer images do not establish the contents of the selected bundle.