For a professional dual extruder
UltiMaker S7
An enclosed FDM printer with a glass door and dual nozzle, a 330 × 240 × 300 mm build volume, and a heated bed up to 125°C per UltiMaker.
Documentary analysis · Not personally tested
Specification sources reviewed 2026-09-12. These are manufacturer claims, not measurements by Find My 3D Printer.
Why consider it?
An enclosed chamber with a glass door and an Air Manager filter, built for professional use in an office or shared room.
What to verify
Advanced multicolor isn't the main use case: the dual nozzle mainly targets model-plus-support printing, not many-color prints.
The specifications that matter
- Process
- FDM
- Nominal build volume
- 330 × 240 × 300 mm
- Enclosure
- Enclosed
- Multicolor
- Dual extrusion with swappable print cores, built for model-plus-support printing rather than heavy multicolor work.
- Materials
- 280+ materials per UltiMaker: PLA, PETG, ABS, CPE, CPE+, PC, nylon, PP, TPU 95A, and PVA/breakaway support.
Allow room for supports and the chosen orientation. Confirm the exact nozzle, feeder, included accessories and installation clearance against the manual and seller’s listing.
Which projects is it for?
The S7 is an enclosed FDM printer with a glass door, a build volume of 330 × 240 × 300 mm per UltiMaker, and a swappable dual nozzle. It targets an engineering office or professional workshop that needs reliability and a wide range of validated material profiles.
The integrated Air Manager filter and the heatbed reaching up to 125°C target shared use, in a classroom or open office, where filtering particles matters as much as print quality.
Materials and setup
UltiMaker lists compatibility with more than 280 materials, including PLA, PETG, ABS, CPE, CPE+, PC, nylon, PP, and TPU 95A, with swappable print cores and PVA or breakaway support for complex parts.
The dual nozzle mainly serves to combine a model with a soluble support rather than multiply colors on the same part, unlike an AMS system or a multi-head tool changer.
What the bundle includes or not
Per UltiMaker's listing, the base configuration includes the printer, a flexible PEI build plate, two AA 0.4mm print cores and one BB 0.4mm print core, a spool holder, sample materials (Tough PLA and PVA), the Air Manager filter, and an accessory case.
Pro bundles typically add a material station and extra filaments: check precisely what a listing includes before comparing prices across configurations.
Alternatives to compare
For a hotter hotend and higher advertised productivity, the S8 is the direct comparison at UltiMaker. The FDM vs resin guide helps weigh the S7 against a resin machine when detail matters more than part durability.
For a lower budget in an enclosed chassis, Prusa Research's CORE One offers a comparable approach at a lower cost, without the same professional software ecosystem.
Sources and limits
We have not measured noise, real printing speed, accuracy or reliability. Manufacturer images do not establish the contents of the selected bundle.