For more speed, same footprint

Creality Ender-3 V3 KE

An open-frame FDM printer running Klipper, with a 220 × 220 × 240 mm nominal build volume and a nozzle rated up to 300°C.

Filament (FDM)220 × 220 × 240 mmOpen frame

Documentary analysis · Not personally tested

See the manufacturer and sellers

Creality Ender-3 V3 KE, manufacturer image — Image provided by Creality. Equipment shown does not establish the contents of the selected bundle.

Specification sources reviewed 2026-09-12. These are manufacturer claims, not measurements by Find My 3D Printer.

Why consider it?

Klipper firmware, a direct-drive extruder, and a linear rail on the X axis for a top speed advertised at 500 mm/s.

What to verify

Open frame: ABS and ASA call for a ventilated, draft-free room, since there is no enclosed chamber.

The specifications that matter

Process: FDM
Nominal build volume: 220 × 220 × 240 mm
Enclosure: Open frame
Multicolor: No multicolor system included; a Creality filament system is offered as a separate accessory.
Materials: Hyper PLA, PETG, ABS, TPU (95A) and ASA per Creality's profiles.

Allow room for supports and the chosen orientation. Confirm the exact nozzle, feeder, included accessories and installation clearance against the manual and seller’s listing.

Which projects is it for?

The Ender-3 V3 KE is an open-frame FDM printer with a 220 × 220 × 240 mm nominal build volume per Creality. It runs Klipper firmware and pairs a direct-drive extruder with a linear rail on the X axis, for a top speed advertised at 500 mm/s. It suits makers who want faster parts than a standard Ender-3 V3 SE without changing the bed footprint.

The nozzle heats up to an advertised 300°C thanks to a 60 W ceramic heater, which opens the door to more technical filaments than PLA while staying on an open frame.

Materials and configuration

Creality lists compatibility with Hyper PLA, PETG, ABS, TPU (95A), and ASA. That wide material range relies mostly on the high nozzle temperature rather than on any enclosure, which this model does not have.

A Creality filament system is mentioned as a compatible accessory rather than stock equipment: check the retailer's listing to see whether it's included in your chosen offer before counting on multicolor printing out of the box.

What the bundle includes or not

Creality's page highlights auto-leveling, one-tap self-test, and automatic filament loading, controllable from the touchscreen or the WiFi app. The exact box contents (accessories, PEI plate, spare parts) should still be checked on the retailer's listing, since they can vary by offer.

The open-source Klipper firmware, with files published openly, sets this machine apart from other models in the V3 lineup that run more conventional firmware.

Alternatives to compare

For a more accessible price at a similar footprint, the Ender-3 V3 SE stays the simplest model in the lineup. For a noticeably larger plate with the same CoreXZ architecture, the Ender-3 V3 and Ender-3 V3 Plus are worth comparing.

The Creality page covers the rest of the lineup, and the PLA vs PETG guide helps pick the first material to try on this multi-filament machine.

Frequently asked questions

Does the Ender-3 V3 KE print ABS without issues?

Creality lists ABS as compatible thanks to the 300°C nozzle, but the frame stays open: a ventilated, draft-free room is still recommended to limit warping.

Is the Creality filament system included?

No, it's a compatible accessory listed separately by Creality. Check the retailer's listing precisely to see whether your offer includes it before counting on multicolor printing.

What does Klipper firmware add over a V3 SE?

Klipper enables the advertised 500 mm/s top speed and finer tuning, with open-source files published publicly. The V3 SE stays simpler but slower based on Creality's advertised speeds.

Sources and limits

We have not measured noise, real printing speed, accuracy or reliability. Manufacturer images do not establish the contents of the selected bundle.